![]() ![]() Gently pull to remove the left centre dash plate. ![]() Remove the dash panel: To remove the dash panel, use a 10mm socket to remove two screws, one on either side of the lower part of the lower dash.To the left of the brake pedal, you’ll see a nut. Remove the trim: Remove the floor mats and gently pull the side trim piece to remove it.Disconnect the battery: Before you do any electrical work, you’ll need to disconnect the battery.How to install the Tow-Pro in your 2019 - 2021 4Runner Pliers (or anything capable of cutting zip ties).You will need some tools to make installation easier, we recommend having on hand Also included are two cables, the universal wiring harness and the wire that connects the Tow-Pro to the dial, the remote head bezel and nut and a square switch insert. The remote head unit and remote head dial are also on tip of the box. Inside the Tow-Pro box is the brake controller unit itself, with the plug for the switch controls on one end and the plug for the truck on the other. Tow-Pro Switch Insert to suit Toyota and Mitsubishi.Toyota Suitable Brake Controller Harness.For an easy to install brake controller in a Toyota 4Runner with a tow unit you’ll need REDARC has designed a range of vehicle specific wiring harnesses to make installation in some of the most popular overlanding vehicles simple. With the right tools, installing the Tow-Pro takes about thirty minutes. As far as installation, both main control units are approximately the same size and install in the same way. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |